The Canyon Rocks set of 3d printed scatter terrain contains 10 distinct rock outcroppings and spires, and while they may be spread over the battlefield, several of the pieces have flat tops to allow stacking for impressive line of sight blocking spires.
The Burbling Pits: Lava are a set of three shard lined depressions filled with boiling lava! Alternately, with the right paint job, they could be any dangerous roiling liquid! Use as part of your expedition against the demon lord, scatter terrain for Chaos wastes, or strange formations on alien worlds.
These sharp upthrust outcrops of bone, stone, and spirit mark the edges of a dark lord’s domain, the depths of a Chaos tainted land, or a spiritual hellscape!
[Insert short description here]
The Druid Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Druid Dice Tower is printed in 28mm scale and stands 10" tall, 5.5" wide, and 7" deep.
The Barbarian Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Barbarian Dice Tower is printed in 28mm scale and stands 6" tall, 7" wide, and 6" deep.
The Monk Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Monk Dice Tower is printed in 28mm scale and stands 8" tall, 6" wide, and 7.75" deep.
The Dungeon Master Dice Tower ships in two unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Cleric Dice Tower is printed in 28mm scale and stands 11" tall, 5.5" wide, and 5" deep.
The Paladin Dice Tower ships in four unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Paladin Dice Tower is printed in 28mm scale and stands 12" tall, 6" wide, and 7" deep.
The Kraken Dice Tower ships in four unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Kraken Dice Tower is printed in 28mm scale and stands 12" tall, 7" wide, and 7" deep.
The Rogue Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Rogue Dice Tower is printed in 28mm scale and stands 7.5" tall, 6" wide, and 6" deep.
The Wizard Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Wizard Dice Tower is printed in 28mm scale and stands 12" tall, 5" wide, and 6" deep.
The Fighter Dice Tower ships in two unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Fighter Dice Tower is printed in 28mm scale and stands 8" tall, 6" wide, and 7.75" deep.
The Cleric Dice Tower ships in four unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Cleric Dice Tower is printed in 28mm scale and stands 12" tall, 5" wide, and 7" deep.
The Artificer Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Artificer Dice Tower is printed in 28mm scale and stands 10" tall, 6.25" wide, and 8" deep.
The Clockwork Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Cleric Dice Tower is printed in 28mm scale and stands 9.25" tall, 5.75" wide, and 7" deep.
The Phoenix Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Cleric Dice Tower is printed in 28mm scale and stands 10.75" tall, 4.25" wide, and 6" deep.
The Tiamat Dice Tower ships in four unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Tiamat Dice Tower is printed in 28mm scale and stands 12" tall, 7" wide, and 7" deep.
The Warlock Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Warlock Dice Tower is printed in 28mm scale and stands 10" tall, 6" wide, and 7" deep.
The hexagonal base, with outlying bastions, measures 8 and 1/2 inches at its widest. Assembled, the Weis & Hickman Dice Tower stands 11 and 1/2 inches tall. The tower comes in two parts and may be separated for storage. The base and structure measures 6 and 1/2 inches high. The domes and spires are slightly shorter at 5 inches.
The Sorcerer Dice Tower features a large central tower with numerous secondary towers and outbuildings surrounding it. The model features extensive worked and natural stone, peaked tiled roofs, and inlaid details for the painter. Dice are inserted into the roof of the central tower and appear in the walled yard at the rock outcropping's foot.
The Vampire Dice Tower ships in three unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Vampire Dice Tower is printed in 28mm scale and stands 11" tall, 6" wide, and 6.25" deep.
The Ranger Dice Tower ships in four unpainted pieces and is compatible with standard sizes of dice up to d20 (12mm - 16mm). The Ranger Dice Tower is printed in 28mm scale and stands 12" tall, 5" wide, and 6" deep.